Summer Starts Here - Save up to 70%
Trailer Wiring Harness Installation - 2006 Ford Five Hundred- Video
Today on our 2006 Ford Five Hundred, we're going to install the tow ready, T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, part number 118395. To being with, we'll need to raise the rear hatch of the vehicle. Next we'll need to go ahead and remove the rear threshold from the lower part of the rear hatch. To do this it's beneficial if you have a body clip fastener removal tool. If not, a large flat head screw driver could be used if necessary. Next we'll go ahead and start on the driver's side. You need to locate the wiring harness where it connects to the back of the light assembly and unclip the connector at the back of the driver side light assembly. more
12/23/2014 2:39:45 PM
Trailer Wiring Harness Installation - 2007 Ford Five Hundred- Video
Today on our 2007 Ford Five Hundred, were going to install the Two Ready T-One Connector, product number 118395. We'll go ahead and open the trunk door as we'll need to remove the trim panels behind the tail lights on both sides. Before we can remove the trim panels behind the lights, we'll need to remove the rear threshold. There are multiple fasteners that will need to be removed in order to remove the threshold. Here on the passenger's side, well remove the plastic wind nut and then repeat the same on the drivers side. Now, we have multiple plastic push pin fasteners that will need to be removed. more
1/16/2012 11:34:37 AM
Filter Videos
Filter Videos
